Product Description
Chipping hammer, 300g, 500g available sunshine make
Earth Clamps
Product Description
Holand type earth clamps, 300a, 500a available
Holder
Product Description
Electrode holder
Material: Copper coated iron / copper coated brass
Size: 600 fully insulated sunshineweld make
Sunshine Make Fully Insulated Holder
Fully Insulated welding electrode holder
Sunshine Make Semi Insulated Holder
Semi Insulated Welding Electrol Holder
Welding Cables
Product Description 1. Theweldstrong make welding cable can be produced according to the standard IsI 9857/1990 The cable can be used in the connectors og electric weld and pliers of the electrical welding whose toward earth voltage of the low voltage is not more than AC 200V and the pulsant DC peak value is 400V. 2. WELDSTRONG MAKE WELDING CABLE IsI marked & wraped finised 2. Nominal section area(mm2): 16, 25, 35, 50, 70, 95, 120 Standard: ISI
Welding Cable
Product Description
Standard
The sunshine make welding cable can be produced according to the standard Is 9857/1990and .
2. Specific Property for Using (1). The cable can be used in the connectors of electric weld and pliers of the electrical welding whose toward earth voltage of the low voltage is not more than AC 200 V and the pulsant DC peak value is 400V.
(2). The long-time permissible working temperature of cable is not more than 65C. 3. Name and IsI Standard
(1). Rubber Sheathed Welding Cable
(2). H.O.F.R Welding Cable
Welding Helmet
Product Description *Model:AUTO DARKINING *Viewing field: 90 x 40mm (3.54 x 1.58in) *Shade control: Light states: DIN4 *Dark states: DIN9 - 13 Outside stepless adjustment *Switching time: Light - dark: 1/20000 - 1/30000sec (0.05-0.035ms) *Delay time: Dark - light: 0.1 - 1sec *Sensitivity / Delay Time: Stepless Adjustable *UV/IR protection: Up to shade DIN16 at all time *Operating temperature: -5º C to +55º C *Power supply: Solar Cells Batteries, Integral Two Lithium Batteries *Lens power control: Auto-on, Auto-off 15 minutes (when not on welding) *Standards: CE: EN379: 2003; EN169: 2002; EN175: 1997 *Helmet Material: PP (Fireproofing) *Total weight: 500g
Welding Helmet
Welding Glooves
Grey cowhide split leather welder glove, full palm and one piece leather back, wing thumb, welt seam, full lining, size: 14\"
Leather & Cotton Gloves
Product Description
Grey cowhide split leather welder glove, full palm and one piece leather back, wing thumb, welt seam, full lining, size: 14\"
Welding Glass
Product Description Welding glass Black, transparant, square, round Different sizes All shade numbers we also supply welding electrode, electrode holder, welding helmet, welding gloves, earth clamp, and other welding accesories and welding machine
Welding Transformer
Introduction & its’ Application / Process Capability In AC welding, Alternating Current (AC) is used i.e. the direction of current flows changes every 1/120 of a second that is the electron travels alternately from anode to cathode (Fig. 1-3) and the electrode & work gets heated alternately. The rapid reversal of the current flow causes the welding heat to be evenly distributed on both the work and the electrode. The even heating given the weld bead a balance between penetration & buildup. They are quieter, more energy efficient. Requires less maintenance. Less expensive. In AC welding a step down transformer is used. It takes high voltage, low current & changes into high current, low voltage. Except for some power lost by heat within T/F, the power (Watts) into T/F equals the power (Watts) out because the volts & amperes are mutually increased or decreased. Welding T/F can be classified by the method by which the control or adjust the welding current. The major classification are multiple coil called Taps, movable coil or movable core(Fig. 1-1)
Features It is a moving core type Welding Transformer. Current adjusted by turning a handle wheel/lever that moves the internal parts closer together or father apart. Moving the core which concentrates more of the magnetic force on the secondary coil thus increasing the current. Moving the core out allows the field to disperse and the current is reduced (Fig. 1-2) Versatile. Can be used in variety of metal and position. Low cost machine.
AC Arc Welder
Introduction & its’ Process Capability
In AC welding, Alternating Current (AC) is used i.e. the direction of current flows changes every 1/120 of a second that is the electron travels alternately from anode to cathode (Fig. 1-3) and the electrode & work gets heated alternately. The rapid reversal of the current flow causes the welding heat to be evenly distributed on both the work and the electrode. The even heating given the weld bead a balance between penetration & buildup.
They are quieter, more energy efficient.
Requires less maintenance.
Less expensive.
In AC welding a step down transformer is used.
It takes high voltage, low current & changes into high current, low voltage. Except for some power lost by heat within T/F, the power (Watts) into T/F equals the power (Watts) out because the volts & amperes are mutually increased or decreased. Welding T/F can be classified by the method by which the control or adjust the welding current. The major classification are multiple coil called Taps, movable coil or movable core(Fig. 1-1)
Application
Maintenance
Construction
Repair Works
Used where 2-ø/3-ø Supply Systems are not available
